Connector Screw
![]() |
![]() Audio Speaker Cable Yellow Screw Type Banana Plug Connector 2 Pcs US $6.97
|
Things you need:
• wire cutters
• screwdriver set
• electrical tape
• wire Stripper
• new car stereo (main unit)
Prepare for employment
What to do:
Buying a new car. Make sure that you will fit properly into the slot of your old stereo. In addition, when purchasing a new car, you may be able to buy a harness that are specific to both your car and the car radio. Buy from these if you can and make wiring a snap, literally!
Gather these tools and materials: screwdriver, pliers stripper, wire cutters and electrical tape.
You also need instructions for removing the dashboard of your car, take off, follow the instructions to properly remove your old radio.
Remove the old stereo
Disconnect the ground (negative) battery cable. NEVER work connected to the electrical system in your car with this connected.
Remove the panel that covers your stereo. detach and slide your old car. It is either a single plugin with several son who are on the back of the computer or a bundle of cables individual. If there is a cluster of son in the back of the car, take your time and do and you want to do both, to avoid confusion.
Connect your new wiring harness, if you have the wiring harness specific to your car. This will be taken back the new radio. If you purchased this card, you can skip the next section.
Connecting the wiring manual
Connect each wire, even if you were not able to get individuals to install wiring plug on the radio.
The positive lead of each speaker to the positive terminal first on the back of the stereo. Then connect the negative lead of each speaker to the negative terminal on the back of the stereo. If there is only one wire coming from the speakers, the speakers are grounded on the chassis. If this is the case, you must install the new speaker wiring.
The (-/black) cable, screw or bolt in the area where the stereo is located behind the dashboard. Make sure the wire is connected to metal, not plastic or fiberglass.
Connect the 12 permanent and son plugs (two + / red) to the radio news. Refer to manual for your car to ensure wiring is correct.
Put in the car stereo.
Now you should have a nice single connector son to acquire all right in your car - either from the wiring harness you purchased or one that came with your check stereo son that all are connected correctly.
Drag your new car in the support that accompanies it. In some rare cases you will maybe use the medium of your old car.
Connect the harness plug at the rear of the radio news. Only an insulated wire from your car stereo old left now. This is the antenna. Put it in your car. There is also a power that you antenna will need a connection.
Drag your new stereo into the slot in the dashboard. Do not screw again, you must first test.
Reconnect the negative cable from your car battery.
Turn your car and turn on your new stereo.Turn the volume to hear some music and all your speakers to make sure everything works.
Fasten your new stereo in place and put the table edge coverage.
Congratulations You're done!
Classic Auto Shops
290 S. Arizona Ave
Chandler Arizona 85225
480-963-3616
http://www.classicautoshops.com
|
|
5610E- Connector Screw $5 5610E- Connector Screw is available from bedbathstore.com for only $2.99. Shop bedbathstore for the best price and quality with Free Shipping. |
|
|
Cables To Go Screw-on Banana Speaker Connector $14.99 29785 3.20 oz 4 Audio Connector Banana Plug Banana Plug Male Black Cables To Go Red RoHS Screw-on Banana Speaker Connector Yes www.cablestogo.com |
|
|
Thomas & Betts Thomas & Betts Screw-in Connector XC2432 $4.42 Screw-in connector Also for use with armored (BX) cable Screw-in type, pressure cast zinc UPC coded UL listed 1? trade size, 1? knockout, 2 per bag, Available Only At Medina, Waco, Lexington, Woodburn, Mesquite Brand #: Thomas & Betts XC2432 UPC: 785991145083 Keywords: conduit fitting squeeze flexible connector romex box armoured cable box armored screw in |
|
|
Halex adalet .75in. Screw In Connector 20442 $25.58 Screw in connector. For indoor use. Connects flexible metallic conduit to steel outlet boxes load center or other metal enclosures. Zinc.75 . Length: 1.62. Width: 1. Height: 1.12 |
|
|
Halex adalet .50in. Screw In Connector 20440 $23.09 Screw in connector. For indoor use. Connects flexible metallic conduit to steel outlet box load center or other metal enclosure. Fits .50 knockout. Zinc.50 . Length: 1.38. Width: 1. Height: 0.92 |
|
|
Halex adalet .50in. Set Screw Connector 21210 $22.53 Set screw connector. For indoor use. Connects EMT conduit to steel outlet box load center or other metal enclosure. Concrete tight .50 to .75 and when taped 1 to 4 . Zinc.50 . Length: 1.16. Width: 1. Height: 0.41 |
|
|
Mabis 07325060 Screw Connector Metal Female $18.41 Founded in 1992 MABIS DMI healthcare has been fostering innovation teamwork and a customer driven philosophy we continually evolve to support your needs in a competitive and ever changing marketplace. With over 5 000 products for the professional consumer and specialty markets we are dedicated to providing you with all your needs in the healthcare industry. Durable metal screw connectors. Made of Metal. Female connector. Connection: Screw |
|
|
Mabis 07324060 Screw Connector Metal Male $18.41 Founded in 1992 MABIS DMI healthcare has been fostering innovation teamwork and a customer driven philosophy we continually evolve to support your needs in a competitive and ever changing marketplace. With over 5 000 products for the professional consumer and specialty markets we are dedicated to providing you with all your needs in the healthcare industry. Durable metal screw connectors. Made of Metal. Male connector. Connection: Screw |
|
|
Connector $1.5 Connector |
|
|
Welch Allyn Male Screw Type Connector with Female Luer Slip $12 Features of the Welch Allyn Male Screw Type Connector: Female luer slip inside. 5/32" (4 mm) hose barb. For Welch Allyn Atlas and Vital Signs Monitors, Welch Allyn Spot, and Critikon cuffs. |
|
|
Mabis 07326060 Screw Connector Metal Set $20.98 Founded in 1992 MABIS DMI healthcare has been fostering innovation teamwork and a customer driven philosophy we continually evolve to support your needs in a competitive and ever changing marketplace. With over 5 000 products for the professional consumer and specialty markets we are dedicated to providing you with all your needs in the healthcare industry. Durable metal screw connectors. Made of metal. Set of Connectors: Male and Female. Connection: Screw |
|
|
10mm Screw Male to 8mm Male L Connector Push In Fittings $4.2 Description:10mm Screw Male to 8mm Male L Connector Push In Fittings.L Connector Fittings are used in pneumatic piping.Elliptical release ring 8mm help to connect tube easily by manual, no special tools required.Metal male screw on one end of the 10mm Screw Fittings, hole for tubing on other end with push-in ring to release tubing.Release ring inner diameter: ~8mmMale thread outer diameter: ~10mmTotal Size of the: ~1 5/16" x 1 1/16" x 5/8"(L*W*H)Weight: 17.3gColor: as picture showPackage include:1 x 10mm to 8mm Male Fittings |
|
|
Cables To Go / 12 AWG Screw-On Banana Plug Speaker Connector - 4pk / 29785 $16.18 Cables To Go - 12 AWG Screw-On Banana Plug Speaker Connector - 4pk - 29785 |
|
|
Cables To Go / 8 AWG Screw-On Banana Plug Speaker Connector - 4pk / 29780 $20.59 Cables To Go - 8 AWG Screw-On Banana Plug Speaker Connector - 4pk - 29780 |
|
|
30A Cable Post Electrical Screw Terminal Block Connector 2 $6.7 Description:Cinch terminal block 2-pin 12 point screwWire Protector 30A Terminal Blocks Screw to ScrewScrew Terminal can be cut to desired number of ways.Flexible plastic external.Ampere: 30ASize: 16 x 2.2 x 1.6cm (L*W*D)Weight: 35gPackage included 2 x 2Pin 12 point Connector Terminal BlockTo be used for home wire, electronic circuit, machine wire's wire connector, prevent from circuit in disorder. |
|
|
2 pcs 12 Way 10A Electrical Screw Terminal Connector $5.2 Description:Cinch terminal block 2-pin 12 point screwWire Protector Terminal Blocks Screw to ScrewScrew Terminal can be cut to desired number of ways.Flexible plastic external.Ampere: 10ASize: 11.2 x 1.7 x 1.4cm (L*W*D)Weight: 40gPackage content:2 x 2Pin 12 point Connector Terminal Block |
|
|
20A 2-12 Way Electrical Screw Terminal Block Connector 2 $6.2 Description:Cinch terminal block 2-pin 12 point screwWire Protector 20A Terminal Blocks Screw to ScrewScrew Terminal can be cut to desired number of ways.Flexible plastic external.Ampere: 20ASize: 12.1 x 1.8 x 1.4cm (L*W*D)Weight: 60gPackage included 2 x 2Pin 12 point Connector Terminal Block |
|
|
Screw $10 Screw |
|
|
Drive Medical 18303G 540 Regulators Nut Connector with Screw Outlet 1 per Box $46.79 Drive Medical 18303G Oxygen 540 Regulators with Liter Adjustment and Various Connection Styles. Nut Connector with Screw Outlet. Liter Flow Increments: 0 . 12 . 5 1 1. 5 2 2. 5 3 4 6 8. Nut Connector. |
|
|
5PCS DC Power Female Jack to 2 Conductor Screw Down Connector for LED Light Controller $2.59 FeaturesL5.5mm W2.1mm DC Power Female Jack to 2 Conductor Screw Down Connector For LED light controller Simply and Professional appearance for power cabling Easier for camera installation, save time and more securer cable connection No electrical tap, No splicing, no crimping, but only a small screw driver |
|
|
74815 - Baluster Connector W/Screw Blk $15.4 [6133334] UPC: 711592326323 8.75L x 10.25W x 6.5H 0.28 LB 0.34 Cubes |
|
|
21212 - 3/4 inch Emt Set Screw Connector $11.39 [6775464] UPC: 051411212124 6.13L x 12.38W x 4.13H 0.45 LB 0.18 Cubes |
|
|
74834 - Railing Connector W/Screw Blk $15.55 [0194662] UPC: 711592344426 14.75L x 8.75W x 6H 0.4 LB 0.45 Cubes |
|
|
74818 - Stair Connector W/Screw Bronze $14.99 [8707986] UPC: 711592330528 8.75L x 9W x 4H 0.12 LB 0.18 Cubes |
|
|
74817 - Stair Connector W/Screw Black $14.99 [0010959] UPC: 711592330122 8.75L x 9W x 4H 0.12 LB 0.18 Cubes |
|
|
12112 - 1-1/4 Emt Set Screw Connector $10.74 [6775159] UPC: 051411121129 12.37L x 4.37W x 6.12H 0.26 LB 0.19 Cubes |
|
|
12115 - 1-1/2 Emt Set Screw Connector $11.35 [6775167] UPC: 051411121150 9.14L x 7.55W x 5.37H 0.33 LB 0.21 Cubes |
|
|
12120 - 2In Emt Set Screw Connector $11.98 [6775175] UPC: 051411121204 13.24L x 4.2W x 6.06H 0.47 LB 0.2 Cubes |
|
|
21210 - 1/2 inch Emt Set Screw Connector $11.27 [7957889] UPC: 051411212100 6.38L x 5.63W x 12.38H 1.76 LB 0.26 Cubes |
|
|
Wire Connector 12 Point Screw Terminal Block 5A 2 $4.7 Description:Cinch terminal block 2-pin 12 point screwWire Protector Terminal Blocks Screw to ScrewConnector Terminal Block can be cut to desired number of ways.Flexible plastic external.Ampere: 5ASize: 10.5 x 1.3 x 1.2cm (L*W*D)Weight: 30gPackage content: 2 x 2Pin 12 point Screw Terminal |
|
|
StarTech.com PC Screw Kit - Screw Nuts and Standoffs $30.99 1 Year Limited 1.20" 4.20" 8.20" PC - Handy plastic case with dividers Label inside the lid explains common use for each item, and lists a StarTech.com reorder part number for replenishment Screw 6-32 x .25 Inches: Used in PC case cover and I/O plates Screw 6-32 x .15 Inches: Used to install hard drives Screw M3 x .25 Inches: Used to install floppy drive, CD-ROM drive and motherboard Screw 4-40 x .18 Inches: Used in I/O plate connector Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis Metal Jackscrew Standoffs 4-40: Used in I/O plate connector Case fan screw: Used to install plastic-framed cooling fans to PC chassis Nuts 4-40 x 6 mm: Used in joining cables Nuts 4-40 x 1.6 mm: Used in screw 4-40 AT-style PC Case Standoffs: Used to install motherboards to a PC chassis Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis Screw Case Screws of 7 different catagories for a total of 350 screws Assortment of Standoffs Fasteners 12 Carrying Case PC Screw Kit - Screw Nuts and Standoffs PCSCREWKIT Plastic Screew StarTech.com StarTech.com's PC Screw Kit offers a handy assortment of common PC fasteners for building, reparing, and maintaining computer systems. The PC screw kit includes 12 different fasteners all in a plastic carrying case with divided compartments._x000D_ The PC screw kit offers 50 screws in each of 7 category types, for a total of 350 screws, as well as an assortment of standoffs. Top-loading www.startech.com |
|
|
Neutrik 4 Pole Speakon Connector $6.99 Neutrik is synonymous with quality loudspeaker connections. This 4 Pole Speakon Connector, like the rest of their products, is an extremely reliable and robust cable connector with a reliable "Quick Lock" locking system. It features solid contacts with screw-type terminals including a stranded wire protection for solder termination. Easy to assemble, it has a 1-piece strain relief, chuck for 7 to 14.5 mm cable O.D.. The current rating is 40A rms continuous, and it can handle up to 50A audio signal, with a duty cycle of 50%. |
|
|
Halex adalet .50 in. Zinc SetScrew Connector 90481 $21.37 Set screw connector. Use to connect steel or aluminum flexible metallic conduit to a steel outlet box or other metal enclosure in a dry location. Made from zinc.50 . Length: 0.94. Height: 1.46 |
|
|
F-connector T-tool $6.99 T-handle tool allows coax connectors to be installed on cable easily. Includes gauge for checking cable length once it's been stripped. Can be used with F-type screw-on and crimp-type connectors. |
|
|
Chief KTA1001B Multiple Monitor Array Connector Bracket $26.99 KTA1001B Multiple Monitor Array Connector Bracket 2 x Screw, Hex Head Cap, (1/4-20 x 1/2") 2 x Screw, Hex Head Cap, (1/4-20 x 3/4") 4 x Nut, Square, (1/4-20) Monitors Black Chief Chief Manufacturing Flat Panel Display KTA1001B KTA1001B Multiple Monitor Array Connector Bracket Mounting Bracket www.chiefmfg.com |
|
|
Chief KTA1001S Multiple Monitor Array Connector Bracket $26.99 KTA1001S Multiple Monitor Array Connector Bracket 2 x Screw, Hex Head Cap, (1/4-20 x 1/2") 2 x Screw, Hex Head Cap, (1/4-20 x 3/4") 4 x Nut, Square, (1/4-20) Monitors Chief Chief Manufacturing Flat Panel Display KTA1001S KTA1001S Multiple Monitor Array Connector Bracket Mounting Bracket Silver www.chiefmfg.com |
|
|
Ay Mcdonald Ay Mcdonald 1ctsx1cts Connector 4758-22 $19.65 1ctsx1cts connector Copper tube size X copper tube size compression connector for SDR-9 CTS polyethylene tubing Brass fitting includes buna-n gasket, anti-friction ring, Mac-Pak nut with split clamp, and stainless steel screw Insert stiffener is required in tubing ends 3/4? CTS x 3/4? CTS Brand #: AY McDonald 4758-22 UPC: 053565067018 Keywords: cts connector fitting water service compression brass |
|
|
Ay Mcdonald Ay Mcdonald 1ctsx1fipt Connector 4754-22 $19.81 1ctsx1fipt connector Copper tube size X Female pipe thread Compression connector for SDR-9 CTS polyethylene tubing Brass fitting Includes buna-n gasket, anti-friction ring, Mac-Pak nut with split clamp, and stainless steel screw Insert stiffener is required in tubing end 3/4? CTS X 3/4? F.I.P.T Brand #: AY McDonald 4754-22 UPC: 053565067025 Keywords: brass fitting connector cts water service compression |
|
|
Leviton Leviton Almond F-connector Jack R15-40831-00A $3.56 Almond f-connector jack Designed for video applications such as TV, HDTV, VCR, and satellite Screw-on front and rear connections Use with coaxial cable terminated with an F-connector plug Snaps easily into any QuickPort housing or wall plate QuickPort products can be mixed or matched to create custom audio, video, voice, and data configurations QuickPort's snap-in design ensures easy changes and compatibility with future technologies Almond Brand #: Leviton R15-40831-00A UPC: 078477114964 Keywords: jack multi media f connector snap in module |
|
|
Screw It $21.99 Screw It - T-Shirt |



US $7.79



















































































