Enclosure Kit
 |
 NEW ASM PN 04 323035A01 Enclosure O Ring Set Kit  US $520.76
|
 KIT15 HAI OMNIPRO II PACKAGE WITH ENCLOSURE NEW US $1,395.00
|
 KIT12E HAI OMNI IIE PACKAGE WITH ENCLOSURE NEW US $955.00
|
 SMT 0402 capacitorreisotor kits combo in 2 enclosures US $245.65
|
 ROCKETFISH HARD DRIVE ENCLOSURE KIT FOR 25 PATA EIDE HARD DRIVES US $5.95
|
Location
Operating a diesel generator set will result in a certain amount of noise (although steps can be taken to reduce this significantly) and diesel exhaust fumes. If possible, a location downwind of your home/business should be selected so diesel fumes are carried away from people and buildings by the prevailing winds. A reasonable distance between your home/business and the site of the generator enclosure, will (in combination with soundproofing measures)reduce any noise pollution.
Placement
Diesel generators are heavy and should sit on a solid, level surface. The ideal solution is to pour a reinforced concrete slab approx 4" thick. The slab should be large enough for the generator and fuel tank to sit on. There should be sufficient room to walk around the generator (in order to service and maintain the machine) and for a block wall enclosure to be built around the generator (the fuel tank should not be placed inside this enclosure).
Prior to pouring the slab, a trench (18" deep is ideal) should be dug between the generator slab and an access point adjacent to the mains electricity supply/distribution board in your building, close to where your transfer switch will be located. Pipe work should be laid of a sufficient size to accommodate the cables and generator control wires (minimum of 25mm cable per 100amps of supply). The pipe work should begin with a vertical feed through the slab and care should be taken to ensure that there are no 90 degree bends. Any bends should be gentle so cables will not jam or snag as they are pulled through. Whilst laying the pipe, you should run a length of strong rope through the pipe work, this will be used later to pull the generator cables through.
After pouring the concrete slab, a few inches of concrete should be poured along the trench on top of the pipe work prior to the trench being back filled. This will help prevent future cable damage.
Generator Enclosure
Diesel generator sets are sensitive to extreme heat and moisture and need to be protected from excesses of both. The best way to achieve this is to build a custom enclosure around the generator set.
The design of the enclosure should allow for maximum airflow, whilst reducing the chance of moisture penetration. Moisture penetration into the alternator is one of the main causes of generator burn outs and can be avoided for the most part by enclosure design.
Simple block walls supporting a metal framed, tiled roof, is a good basic structure. The roof should be lined with heat reflective material to prevent excessive radiant heat penetration (painting the roof and walls white will also reflect some radiant heat). The eaves of the roof should descend as low as is practicable to prevent rainwater being blown into the enclosure in high winds. A wide door (30" or 32") should be fitted for operator access and maintenance.
Air is drawn in through the rear of a generator and expelled through the radiator at the front of a generator. To allow a sufficient volume of air to be drawn in through the generator enclosure, the final course of block work at the top of the block wall to the rear of the generator, should be of a decorative type with holes in the block. The generator will draw air through this course of block. The hot air expelled through the radiator should be channeled through a simple duct work arrangement between the face of the radiator and further decorative block work on the wall directly to the front of the generator. All decorative block work should be lined on the inside of the generator enclosure with fine plastic or metal mesh material to prevent insect penetration into the generator enclosure.
The walls, door and ceiling should be lined with sound absorbent material, this will significantly reduce the noise signature of the generator set. If noise continues to be a problem other solutions include; building a cavity wall as opposed to a single block wall, and/or fitting baffles around the decorative block (airflow in) and radiator (airflow out). These measures will reduce the noise signature further still. If noise reduction is an absolute priority, purchasing a generator in a silent canopy, then installing it within a block built and soundproof lined generator enclosure is the way to go.
Sufficient lighting and an additional mains power outlet should be fitted within the enclosure for the purpose of generator maintenance and service. If possible a water supply should be run to the outside of the enclosure and hosepipe fitted (for radiator top up).
John Walker designs, manufactures, installs and commissions diesel generators and transfer switch panels in Thailand. Visit our website at http://www.generatorsolutions.org to learn more about diesel generators.
|
|
Enclosure Lighting Kit for the $56.82 Enclosure Lighting Kit for the VE-5x5, VE-6x7, E-1600A-BLT-EWP |
|
|
Enclosure Lock Kit $20.99 OPEN HOUSE H-208 LOCK KIT FOR HINGED ENCLOSURE COVER |
|
|
Enclosure Casters rack casters kit $149.99 Belkin Enclosure Casters - Rack casters kit |
|
|
Viking / Enclosure Lighting Kit / VE-LIGHT $64.4 Viking - Enclosure Lighting Kit - VE-LIGHT |
|
|
Bestop HighRock 4x4 Element Door Enclosure Kit $125.99 Bestop HighRock 4x4 Element Door Enclosure Kit |
|
|
Compaq Storagework 4214R Enclosure With Rail Kit 103381-001 $360.25 Compaq Storagework 4214R Enclosure With Rail Kit 103381-001 |
|
|
HP Miscellaneous Blank Panel Kit for c7000 Enclosure $108.99 412148-B21 HP c7000 Enclosure Blanking Panel HP Hewlett-Packard Miscellaneous Blank Panel Kit for c7000 Enclosure www.hp.com |
|
|
American Standard M9502500070A Faucet DC Solenoid Valve Enclosure Kit $155.41 Faucet DC Solenoid Valve Enclosure Kit. |
|
|
IBM Full-High Tabletop Tape Enclosure Storage Enclosure w/O Converter Kit And Cable 8768FHX $91.22 IBM Full-High Tabletop Tape Enclosure Storage Enclosure w/O Converter Kit And Cable 8768FHX |
|
|
IBM SAS Enclosure Adapter Kit $128.99 40K2599 IBM: Half-high LTO Generation 3 SAS Tape Drive Half-high LTO Generation 4 SAS Tape Drive IBM IBM Corporation SAS Enclosure Adapter Kit Storage Accessory Kit www.ibm.com |
|
|
Viking Enclosure Lighting Kit for the VE-5x5, VE-6x7, E-1600. Each $57.17 Manufacturer: Viking Electronics. Each. Customers also search for: Discount Enclosure Lighting Kit for the VE-5x5, VE-6x7, E-1600, Buy Enclosure Lighting Kit for the VE-5x5, VE-6x7, E-1600, Wholesale Enclosure Lighting Kit for the VE-5x5, VE-6x7, E-1600, |
|
|
Viking Enclosure Lighting Kit For the VE-5x5 VE-6x7 E-1600A-BLT-EWP Velight $63.12 Viking Enclosure Lighting Kit For the VE-5x5 VE-6x7 E-1600A-BLT-EWP Velight |
|
|
Bestop Highrock Element Front Door Enclosure Kit $123.36 Bestop Doors & Windows in stock now! Read Bestop Highrock Element Front Door Enclosure Kit customer reviews. AutoAccessoriesGarage.com has the best selection of Bestop Jeep Exterior Accessories at the lowest prices around. Bestop Highrock Element Front Door Enclosure Kit are chosen by auto enthusiasts everywhere to personalize their vehicles. Bestop Highrock Element Front Door Enclosure Kit available now at AutoAccessoriesGarage. |
|
|
StorageWorks SAS Rack-Mount Kit - storage enclosure $448.99 HP StorageWorks SAS Rack-Mount Kit - Storage enclosure - rack-mountable - 1U - for LTO-5 Ultrium StorageWorks LTO-5 Ultrium StorageWorks Rack-Mount Kit Ultrium 1760 |
|
|
StorageWorks SCSI Rack-Mount Kit - storage enclosure $396.99 HP StorageWorks SCSI Rack-Mount Kit - Storage enclosure - rack-mountable - 1U - for StorageWorks DAT 160 StorageWorks Rack-Mount Kit Ultrium 920 StorageWorks Ultrium 1760 |
|
|
APC Grounding Kit For NetShelter VX Enclosure $48.99 2 Year 8.11 oz Mounting Hardware 18 x Grounding Straps (6") 6 x Grounding Straps (12") APC NetShelter VX Enclosure Provides protection against electric shock and reduces EMI emissions. APC AR8390 American Power Conversion Corp Grounding Kit Grounding Kit For NetShelter VX Enclosure www.apc.com |
|
|
Belkin Enclosure Casters Rack Casters Kit. Each $167.94 Manufacturer: Belkin. Each. Four heavy-duty casters are made to use with all Belkin 42U Enclosures. Product Description: Belkin Enclosure Casters rack casters kit Product Type: Rack casters kit Manufacturer Warranty: Limited lifetime warranty Customers al |
|
|
SmartRack SR42UBKD Knock-Down Enclosure Kit - rack - 42U $965.99 Tripp Lite SmartRack SR42UBKD Knock-Down Enclosure Kit - Rack - black - 42U - 19" |
|
|
EZ Upgrade Universal Kit - storage enclosure - IDE / SATA-150 - USB 2.0 $36.99 Apricorn EZ Upgrade Universal Kit - Storage enclosure - IDE / SATA-150 - USB 2.0 |
|
|
SSD Upgrade Kit for Notebooks - storage enclosure - Hi-Speed USB $19.99 EDGE SSD Upgrade Kit for Notebooks - Storage enclosure - 2.5" - Hi-Speed USB |
|
|
Data Transfer Kit - storage enclosure - SATA-300 - Hi-Speed USB $28.99 CMS Data Transfer Kit - Storage enclosure - 2.5" - SATA-300 - Hi-Speed USB |
|
|
acomdata HDEXXUP-240 Black Enclosure Kit $15.99 With the proliferation of media and other files available these days, hard drive space is at a premium, and there’s only so much you can shove into a PC case. Eventually, especially if you move things around, you’ll need external storage. Here, Acomdata offers up a fine little enclosure suitable for holding an idle 2.5" SATA hard drive and providing power and a USB 2.0 connection for near universal connectivity. Built with an internal metal chassis that optimizes heat dissipation from your drive, this enclosure helps keep it safe from both thermal and impact stress. Keep your drive and data safe with Acomdata's HDEXXUP-240! Material: Aluminum Dimensions: 3.07" x 5.00" x 0.47" Internal Interface: SATA Specifications: System Requirements Windows PCs: Windows PCs Minimum 233 MHz processor (Pentium, Celeron, AMD, etc.) Windows Vista (Ultimate, Premium, Basic, Business and Enterprise) Windows XP (Home, Pro, pro x64, Media Center and Tablet PC) Windows 2000 SP4 Mac: G3 (or later) PowerPC processor or Intel processor Mac 10.2 or later (PushButton Backup and Sync require OS 10.3 or later) Available 6-pin FireWire port (For operation of hard drive) Features: The High-speed USB 2.0 Enclosure Kit is designed for the 2.5" SATA mobile drive. Hi-Speed USB 2.0: Up to 480 Mbps 48-bit logical block addressing Mac & PC ready Near-Silent Operation Easy Installation Parts: 3 years limited Labor: 3 years limite... |
|
|
TRENDnet TVH100 Outdoor Camera Enclosure $100.04 The Outdoor Camera Enclosure protects TRENDnet s Internet security cameras from extreme weather conditions with an IP66 weather rating. The Outdoor Camera Enclosure is designed for use with compatible TRENDnet Internet security cameras. Use this enclosure to extend your surveillance needs and protect what you value most.Mount the camera on most surfaces with included mounting kit. Set the enclosure s final fixed position by adjusting the enclosure to capture the desired viewing field. A rugged aluminum visor design minimizes reflective solar glare and protects the camera enclosure in extreme conditions. |
|
|
TRENDnet TV-H100 Outdoor Camera Enclosure $78.99 1.68 lb 5.70" Height x 5.50" Width x 10.60" Depth Adjustable mounting kit can secure the enclosure to a vertical or horizontal surface All aluminum construction with IP-66 weather rating Color: White TV-H100 Outdoor Camera Enclosure Quick Installation Guide Mounting Kit TRENDnet Security Cameras: TV-IP110 TV-IP110W TV-IP212 TV-IP212W TV-IP312 TV-IP312W The TV-H100 Outdoor Camera Enclosure protects TRENDnet's Internet security cameras from extreme weather conditions with an IP66 weather rating. The TV-H100 Outdoor Camera Enclosure is designed for use with compatible TRENDnet Internet security cameras. Use this enclosure to extend your surveillance needs and protect what you value most. Camera Enclosure RoHS TRENDnet TV-H100 TV-H100 Outdoor Camera Enclosure Yes www.trendnet.com |
|
|
OpenHouse HC36A 36Enclosure Cover for H336 $38.32 The Model HC36A 36 Enclosure Cover fits on the Model H336 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H336 enclosure. The cover is power coat painted bright white. The optional Model H208 lock kit can be installed on the cover for additional security. Secures and protects components inside the enclosure. Bright white powder coat paint finish. Six louvered vents for enclosure cooling. Accepts the Model H208 lock kit for additional security. |
|
|
OpenHouse HC18A 18Structured Wire Enclosure Cover $29.22 The Model HC18A 18 Enclosure Cover fits on the Model H318 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H318 enclosure. The cover is power coat painted bright white. The optional Model H208 lock kit can be installed on the cover for additional security. Secures and protects components inside the enclosure. Bright white powder coat paint finish. Four louvered vents for enclosure cooling. Accepts the Model H208 lock kit for additional security. |
|
|
Raintight Kit Ballast - Enclosure with Coupling $8.98 Designed for safe and easy outdoor installation of Rainbow UV sterilizers. It keeps the bulb, electrical connection and ballast dry when used with the coupling kit which is included. This product is durable and built to last. Can be used on Rainbow Lifeguard 8wt, 25wt and 40wt models. |
|
|
TRENDnet TV-H500 Outdoor Camera Enclosure $77.99 2 Year Limited 2.65 lb 5.59" Height x 15.35" Width x 4.53" Depth Adjustable mounting kit can secure the enclosure to a vertical or horizontal surface Cables are protected inside the mounting bracket Aluminum construction with IP-66 weather rating Robust construction design provides a cost-effective solution for protecting your TRENDnet Internet camera from the rigors of outdoor use TRENDnet Network Cameras: TV-IP100-N TV-IP100W-N TV-IP201 TV-IP201P TV-IP201W TV-IP301 TV-IP301W TV-IP501P TV-IP501W TV-IP512P TV-IP512WN The Outdoor Camera Enclosure (model TV-H500) protects TRENDnet Internet security cameras from extreme temperature conditions with an IP66 weather rating. This durable aluminum enclosure is designed for use with compatible TRENDnet Internet security cameras. Mount the enclosure on most surfaces with the included mounting kit. The enclosure's final fixed position can be adjusted 360 degrees left-to-right, 40 degrees below horizontal and 15 degree above horizontal. A rugged aluminum visor minimizes reflective solar glare, a hinged swivel-top provides full access to the inside of the enclosure, an access latch-design capable of accepting a padlock (sold separately) protects against camera theft and an easy-install camera mount system reduces IP camera installation time. Camera Enclosure RoHS TRENDnet TV-H500 TV-H500 Outdoor Camera Enclosure Yes www.trendnet.com |
|
|
System fan kit $195.99 HP - System fan kit - for BLc3000 Enclosure BLc3000 Single-Phase Enclosure |
|
|
Trendnet TVH510 Outdoor Camera Enclosure $127.24 The Outdoor Camera Enclosure with Heater and Fan (model TVH510) protects TRENDnet Internet security cameras from extreme temperatures and severe weather with a built in automated heater and fan and an IP66 weather rating. This durable aluminum enclosure is designed for use with compatible TRENDnet Internet security cameras. Mount the enclosure on most surfaces with the included mounting kit. The enclosure s final fixed position can be adjusted 360 degrees lefttoright 40 degrees below horizontal and 15 degree above horizontal. A rugged aluminum visor minimizes reflective solar glare a hinged swiveltop provides full access to the inside of the enclosure an access latchdesign capable of accepting a padlock (sold separately) protects against camera theft and an easyinstall camera mount system reduces IP camera installation time. |
|
|
Trendnet TVH500 Outdoor Camera Enclosure $107.93 The Outdoor Camera Enclosure (model TVH500) protects TRENDnet Internet security cameras from extreme temperature conditions with an IP66 weather rating. This durable aluminum enclosure is designed for use with compatible TRENDnet Internet security camera. Mount the enclosure on most surfaces with the included mounting kit. The enclosure s final fixed position can be adjusted 360 degrees lefttoright 40 degrees below horizontal and 15 degree above horizontal. A rugged aluminum visor minimizes reflective solar glare a hinged swiveltop provides full access to the inside of the enclosure an access latchdesign capable of accepting a padlock (sold separately) protects against camera theft and an easyinstall camera mount system reduces IP camera installation time. |
|
|
Galaxy Metal Gear3500 Tvisto Mini Series - 2.5 Tvisto Mini Multimedia Divx HDD External Enclosure kit $122.99 Galaxy Metal Gear3500 Tvisto Mini Series - 2.5 Tvisto Mini Multimedia Divx HDD External Enclosure kit |
|
|
Galaxy Metal Gear 3500 Tvisto-SATA Series - 3.5 Tvisto Multimedia External Enclosure kit $143.99 Galaxy Metal Gear 3500 Tvisto-SATA Series - 3.5 Tvisto Multimedia External Enclosure kit |
|
|
Acomdata / AcomData SMBXXXU3EPCI-BLK 3.5inch Samba USB3.0 SATA Enclosure Kit Retail with Two-Port PCI Express Card / SMBXXXU3EPCI-BLK $86.14 Acomdata - AcomData SMBXXXU3EPCI-BLK 3.5inch Samba USB3.0 SATA Enclosure Kit Retail with Two-Port PCI Express Card - SMBXXXU3EPCI-BLK |
|
|
Acomdata / AcomData HDEXXXU2E-740 740-3.5inch USB 2.0 SATA Drive Enclosure Kit Retail / HDEXXXU2E-740 $29.66 Acomdata - AcomData HDEXXXU2E-740 740-3.5inch USB 2.0 SATA Drive Enclosure Kit Retail - HDEXXXU2E-740 |
|
|
Apricorn EZ Upgrade Universal Kit Storage Enclosure IDE USB 2.0 Ezupuniversal $44.08 Apricorn EZ Upgrade Universal Kit Storage Enclosure IDE USB 2.0 Ezupuniversal |
|
|
Viking Electronics VKVELIGHT Enclosure Lighting Kit for the $72.77 Add Panel Lighting to Your Viking Doorbox or Entry Phone. The VELIGHT kit adds bright LED illumination to any doorbox or entry phone that is housed in a Viking VE5x5 or VE6x7 enclosure. It can also be used on Viking's E1600ABLTEWP tower phone. Use in combination with the VE6x7 and the K17003 Apartment Entry Phone. Use in combination with the E1600ABLTEWP. Ultra bright LEDs for long life. Easy retrofit to exisitng entry phones. Can use the same power source as doorbox. Can be powered from 12 to 24 volts AC or DC. Power: 12 to 24 volts AC or DC 50mA maximum 12V DC adapter included. Dimensions: 5" x 3" x 1". Maximum Power Run: 304 (1000 ft) using 24 AWG wire. |
|
|
Scosche subwoofer enclosure -- 25cm (10 inch) $59.99 25.4cm (10") subwoofer speaker enclosure kit includes everything you need to build your own sub box in minutes. Fits all trucks and hatchbacks. |
|
|
Scosche subwoofer speaker enclosure -- 30cm (12 inch) $69.99 30cm (12") subwoofer speaker enclosure kit includes everything you need to build your own sub box in minutes. Fits all trunks and hatchbacks. |
