Denis Joseph Nexum Hardware.

Enhanced Ide

Recover data from formatted IDE hard devices drive

Integrated Drive Electronics-IDE is a computer hardware bus used primarily for hard drives and optical drives
Integrated Drive Electronics (IDE) refers not just to the connector and interface definition, but also to the fact that the drive controller is integrated into the drive, as opposed to a separate controller on or connected to the motherboard.
Integrated Drive Electronics later renamed to ATA, with the alias P-ATA ("parallel ATA") retroactively added upon introduction of the new variant Serial ATA. The original name reflected the innovative integration of HDD controller with HDD itself, which was not found in earlier disks. Moving the HDD controller from the interface card to the disk drive helped to standardize interfaces, and to reduce the cost and complexity.

Many IDE devices(including Laptop Hard Drives and standard IDE Hard Drives.) have to format.if you will format IDE drive,make sure the important data have been backuped.Otherwise,you need unformat the IDE device.
Of course,if you lost files after format IDE hard drive,you can recover the files with data recovery software.

Now,EIDE was an unofficial update (by Western Digital) to the original IDE standard, with the key improvement being the use of direct memory access (DMA) to transfer data between the disk and the computer without the involvement of the CPU, an improvement later adopted by the official ATA standards.

In 1994, about the same time that the ATA-1 standard was adopted, Western Digital introduced drives under a slightly new name, Enhanced IDE (EIDE). These included most of the features of the forthcoming ATA-2 specification and several additional enhancements. Other manufacturers introduced their own variations of ATA-1 such as "Fast ATA" and "Fast ATA-2".

The new version of the ANSI standard, AT Attachment Interface with Extensions ATA-2 (X3.279-1996), was approved in 1996. It included most of the features of the manufacturer-specific variants.

About the Author

write by Stick Qiu

24x IBM IDE CD-ROM Plus UltraBay Enhanced Drive Black 42C0963 $5.42 24x IBM IDE CD-ROM Plus UltraBay Enhanced Drive Black 42C0963

BYTECC BT-300 USB 2.0 to IDE/SATA Adapter $19.99 Turn any drive into a hot swappable USB drive with this SATA/IDE to USB adapter from BYTECC. The external power adapter ensures that you have enough power for 3.5" hard drives and 5.25" optical drives. Because you don't need a case, this is a great setup for tech benches and repair shops. It makes data recovery and transfer faster since you don’t have to mount the drive into a system or external case first. Check and connect drives in a hurry with this versatile little tool! Type: USB to IDE&SATA Specifications: Works with 2.5", 3.5" HDD, 5.25" CD/DVD Drive and SATA Drives OS: Microsoft Windows 98SE/ME/2000/XP Mac OS 9.2 or higher Linux 2.4.X Features: USB 2.0 to IDE/SATA Cable Connect any device with an IDE/SATA Interface to a PC with USB interface Transfer rate Approx. 480 MBps Complies with USB 2.0 standards Backwards compatible to USB 1.1 standards Complies with ATA/ATAPI-66 Spe. V1.0 Easy to Install Supports IDE/SATA and enhanced IDE hard drives Supports ATA/ATAPI/SATA CD-ROM/R/RW DVD-ROM and more External power adapter for IDE/ATAPI/SATA devices Linux, Mac compatible Package Contents: USB 2.0 to IDE/SATA Adapter Power Cord Power Adapter

USB 2.0 to IDE Cable for 2.5' 3.5' Drive w/ Power Adapter $19.49 Description:The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port.The USB 2.0 to IDE Adapter turns any IDE drive into a convenient external drive.Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.The Hi-Speed USB interface provides for easy installation with its Plug and Play design.The adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives.Features:USB 2.0 to IDE Cable.The USB 2.0 to IDE Cable connects any device with an IDE Interface to a PC with USB interface.Transfer rate Approx. 480 MBps.Complies with USB 2.0 standards.Backwards compatible to USB 1.1 standards.The USB 2.0 to IDE Cord complies with ATA/ATAPI-66 Spe. V1.0.Easy to Install, plug and play.Supports IDE and enhanced IDE hard drives.Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more.External power adapter for IDE/ATAPI devices.OS support: Wind XP, 2000, ME, 98, Mac OS 9.2, X, Linux, Vista.Weight: 359g.

Multi-Purpose USB 2.0 to Combo IDE+SATA Hard Drive Adapter $16.89 - Plug and play- Compatible with USB 2.0 and USB 1.1- Support IDE and enhanced IDE hard disk- Support ATA/ATAPI CD-ROM/R/RW/DVD-ROM- Support Win XP/2000/ME/98; MAC OS 9.2/X/Linux

IDE 100/133 Motherboard to SATA Hard Drive Bridge Adapter Converter Bridge $8.49 Description: An IDE to SATA or SATA to IDE Bridge Adapter Converter.The IDE to SATA Adapter kit allows you to convert SATA to IDE or IDE to SATA (NOT SIMULTANEOUSLY! ! !).IDE to SATA Converter allows a fast data transfer rate of up to 150 MBytes/secSupports plug and play installationUpgrade to SATA (Serial ATA) speed and performance without overhauling your entire system with this IDE to SATA hard drive upgrade kit.With up to 150 MBytes/sec fast data transfer, improved airflow inside your case, and enhanced data integrity and security, you get all the benefits of a SATA system at a fraction of the cost.Includes a power connector and a SATA data transfer cable to make your upgrade to SATA even easier.Non-OEM(Generic) Product.Specifications:Channels supported: 2SATA Converter Compatibility: CPU: All PC SystemsOperating Systems: XP/2000/VistaConnectors: 2 - 7 pin SATA, 1 - IDE 40 pin, 1 - SP4 power connectorSystem Requirements: A PC running Windows XP, 2000, Vista. An open IDE motherboard connectorWeight: 56gPackage Includes:1 X IDE to Serial ATA Motherboard Adapter Bridge1 X Serial ATA data cable1 X power cable

Micro CF Socket to IDE 50Pin Female Connector Converter $17.49 Description:The CF to IDE Female Connector converts notebook IDE (50-pins) to Compact Flash (CF).Bootable on any operating systems.Micro Connector Converter is fully compatible with Compact Flash Type I, Type II.This CF to IDE 50Pin Converter is an adapter for connecting a compact flash memory card to a IDE host interface, aiming at education sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.Compact Flash disks offer the benefit of low power consumption, low operating temperature, no acoustic noise, shock resistance, and fast read access time.Specification:One end is 1.8" micro IDE 50pin female connector.One end is standard CF socket.One aluminum alloy enclosure for enhanced protection and easy carry.Compatible with DOS, Windows 98/98SE, Me, 2000, XP, Vista & Linux.Bootable, install OS and application on CF card.Size: 7.5 x 5.4 x 0.5cmWeight: 22g

Startech UNI3510U2EB USB2.0 to IDE/SATA HD Enclosur $56.58 UNI3510U2EB eSata/USB to Sata/IDE External Hard Drive Enclosure delivers a versatile and costeffective external storage solution letting you turn any 3.5 Serial ATA (Sata Sata II Sata III) or IDE hard drive into an eSata (Sata only) or USB 2.0 (Sata or IDE) connected external storage solutionfor high capacity drives. The External hard drive enclosure features a large builtin 80mm fan that provides enhanced redistribution of heat buildup generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives and faster spinning drives (i.e 7200 RPM) as it can help keep drives running cooler which can preserve data integrity and the drive s lifespan by reducing the chances of premature failures. Its unique snapin screwless hard drive installation and One Touch Backup which automates backup tasks for simple backups of files and folders at the touch of a button based on predefined settings within the easy to use software utility (included) are design features which provide a convenient and efficient operating experience. The hard drive enclosure features an attractive black aluminum casing that looks great in any operating environment. Convert either an IDE (PATA) or Sata hard drive into an external storage solution with USB 2.0 or eSata connectivity. A screwless design allows for quick and easy installation or removal of hard drives from the enclosure without the use of any tools. Supports either a Sata or IDE (PATA) hard drive. Screwless/toolless design for assembly. High Speed USB 2.0 compliant host interface with support for data transfer rates up to 480 Mbps. Sata revision 2 compliant eSata host interface with support for data transfer rates up to 3 Gbps. Compatible with Sata 1.5/3.0/6.0 Gbps or IDE 66/100/133 Mbps hard drives. Supports 3.5 form factor Sata or IDE hard drives. Durable aluminum chassis construction. 80 mm cooling fan. Plug and Play and hotswap compatible. Technical Specifications:. Color: Black.

P906-18I - Tripp Lite Eide Ribbon Cable - Female Ide - Female Ide - 18 inch $4.44 tripp Lite's Enhanced Ide (eide) Ribbon Cable Connects Up To Two Internal Ide Hard Drives To A Controller Card. This Internal Dual Ultra Dma/ata Ribbon Supports Udma/33, Ata/66 And Ata/100. This 18-inch Cable Is Constructed With 80 Conductor Ribbon And Contains Three 40pin Socket Connectors (one For The Controller Card And The Other Two For Drives). Tripp Lite Warrants This Product To Be Free From Defects In Materials And Workmanship For Life. [1072228] UPC: 037332041654 UNSPC: 26121624 9L x 4W x 0.25H 0.15 LB 0.02 Cubes

P906-24I - Tripp Lite Eide Ribbon Cable - Female Ide - Female Ide - 24 inch $3.27 tripp Lite's Enhanced Ide (eide) Ribbon Cable Connects Up To Two Internal Ide Hard Drives To A Controller Card. This Internal Dual Ultra Dma/ata Ribbon Supports Udma/33, Ata/66 And Ata/100. This 24-inch Cable Is Constructed With 80 Conductor Ribbon And Contains Three 40pin Socket Connectors (one For The Controller Card And The Other Two For Drives). Tripp Lite Warrants This Product To Be Free From Defects In Materials And Workmanship For Life. [244488] UPC: 037332013682 UNSPC: 26121624 5.5L x 4W x 0.5H 0.16 LB 0.04 Cubes

PCI Ultra ATA 133/100 IDE RAID Controller Card $15.6 Ultra ATA133 IDE RAID PCI Controller Card Supports sofware Raid 0, 1 or 0 +1 (optional) Supports IDE bus Ultra DMA at ATA 133/100Mbytes/sec PCI burst rate Supports maximum PCI bus master data transfer rate of 266MB/sec. Two independent Ultra ATA channels with 128 Bytes buffer per channel Supports up to four IDE/ATA devices (coexists with other IDE and SCSI controllers) Fully backwards compatible with Ultra ATA/33, EIDE/Fast ATA-2 IDE And ATAPI devices Supports Ultra DMA2, 3, 4 ; Multi-Word DMA0, 1, 2 And PIO 2, 3, 4 driver modes Compliant to ATA/ATAPI-5 specification and PCI specification version 2.1. Enhanced data integrity of transferred data with CRC (cyclical redundancy check) protection and verification Compatible with Microsoft IDE/ATA drives Most Ideal for attaching extra hard disks to your system Optical drives or other type of the drives may not work You should connect optical drives to onboard IDE controller

USB 2.0 to IDE 2.5' 3.5' Hard Drive Power Adapter w/ SATA Cable $25.49 Description:The USB 2.0 to IDE Adapter turns any IDE drive into a convenient external drive.Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.Access any 2.5"/3.5"/5.25" IDE drive through this hi-speed USB 2.0 port.The high speed USB interface provides for easy installation with its Plug and Play design.The USB to IDE Adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives. Transfer rate up to 480 Mbps. Approx.The USB to IDE Hard Drive Adapter complies with USB 2.0 standards.Backwards compatible to USB 1.1 standards.USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port.The USB IDE Power Adapter complies with ATA/ATAPI-66 Spe. V1.0.Supports IDE and enhanced IDE hard drives.Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more.External power adapter for IDE/ATAPI devices.AC power adapter: input voltage: 100-240VCA, 50/60Hz, 0.5A.Supports Windows ME / 2000 / XP, also support Mac OS 9.2/X and Linux.Size: 6.2cm long, 4cm wide ( at the widest ), 1cm thick. Approx.Color: As picture shows.Weight: 343g.Package contents:1 x USB 2.0 to SATA IDE Adapter with USB cable1 x AC power adapter(100-240VCA,50/60Hz,0.5A)1 x Power cable ( Three pins, AU plug )1x SATA Cable ( 4 pin to 15 pin )

USB 2.0 to SATA IDE 2.5 3.5 Hard Drive Power Adapter Cable $18.49 Description:Access any 2.5"/3.5"/5.25" SATA or IDE drive through Hi-Speed USB 2.0 portComplies with ATA/ATAPI-6 Spe. V1.0, USB Storage Glass spec.1.0;Support: IDE And enhanced IDE Hard Disk; ATA/ATAPI CD-ROM/R/RW/DVD-ROM And More;IDE to USB Adapter supports 480/1.2/1.5Mbps transfer rate;2.5/3.5/5.25 inch multi-function;Connect any device with an SATA and IDE Interface to a PC with USB interface;IDE USB Adapter (HDD, Optional storage);Plug and play function;Support:one hard disk backup to another hard diskPower data transfered indicator lightAC power adapter, input voltage: 100-240VCA, 50/60Hz, 0.5A;USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port;Power with 12V and 5V double channel output: used to supply power to SATA/IDE device;USB to IDE Adapter supports Windows ME/2000/XP/98, also support Mac OS 9.2/X and Linux;Weight: 342gAccessories needed:52x CD-ROM(CD-ROM/CD-RW/DVD-RW and Combo/RAMBO devices)2.5" laptop IDE hard disk2.5" laptop SATA hard disk3.5" desktop IDE hard disk3.5" desktop SATA hard diskPackage contents:1 x USB 2.0 to SATA IDE Adapter with USB cable1 x USB cable1 x SATA data Cable1 x AC power adapter(100-240VCA,50/60Hz,0.5A)1 x Power cable(4 Pin IDE to 15 Pin SATA)

StarTech.com IDE/SATA to eSATA/USB Hard Drive Enclosure $40.99 1 1 Year 1 x 3.5" - 1/3H Internal 1 x IDE Internal 1 x Serial ATA Internal 3.5" Convert either an IDE (PATA) or SATA hard drive into an external storage solution with USB 2.0 or eSATA connectivity. A screwless design allows for quick and easy installation or removal of hard drives from the enclosure without the use of any tools. Backed by a StarTech.com 1 year warranty and free lifetime technical support. OS Support Windows XP, Vista Mac OS 9.x/10.4 and Above Linux StarTech.com's InfoSafe UNI3510U2EB eSATA/USB to SATA/IDE External Hard Drive Enclosure delivers a versatile and cost-effective external storage solution, letting you turn any 3.5" Serial ATA (SATA, SATA II, SATA III) or IDE hard drive into an eSATA (SATA only) or USB 2.0 (SATA or IDE) connected external storage solution for high capacity drives. The External hard drive enclosure features a large built-in 80mm fan that provides enhanced re-distribution of heat build-up generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives, and faster "spinning" drives (i.e. 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity and the drive's lifespan by reducing the chances of premature failures. Its unique snap-in, screwless hard drive installation and "One Touch Backup", which automates backup tasks for simple backups of files and folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included), are design features which provide a convenient and efficient operating experience. The hard drive enclosure features an attractive black aluminum casing that looks great in any operating environment, and is backed by our 1-year warranty and free lifetime technical support. Black External External Enclosure IDE IDE/SATA to eSATA/USB Hard Drive Enclosure Not Applicable Serial ATA StarTech.com Storage Enclosure UNI3510U2EB USB 2.0 External eSATA External www.startech.com

Tripp Lite IDE / EIDE Cable - UDMA 66/100 - 40 Pin IDC (F) - 40 Pin IDC (F) - 2'. Each $3.01 Manufacturer: Tripp Lite. Each. Tripp Lite's enhanced IDE (EIDE) ribbon cable connects up to two internal IDE hard drives to a controller card. This internal dual Ultra DMA/ATA ribbon supports UDMA/33, ATA/66 and ATA/100. This 24-inch cable is constructed

Tripp Lite P906-18I - IDE / EIDE Cable - UDMA 66/100 - 40 Pin IDC (F) - 40 Pin IDC (F) - 1.5'. Each $3.94 Manufacturer: Tripp Lite. Each. Tripp Lite's enhanced IDE (EIDE) ribbon cable connects up to two internal IDE hard drives to a controller card. This internal dual Ultra DMA/ATA ribbon supports UDMA/33, ATA/66 and ATA/100. This 18-inch cable is constructed

3.5IN IDE ATA100 CARRIER $28.99 3.5IN IDE ATA100 CARRIER

15PK 3.5IN IDE ADAPTER FOR $552.99 15PK 3.5IN IDE ADAPTER FOR

Tripplite / IDE TO SATA / P936-000 $27.23 Tripplite - IDE TO SATA - P936-000

USB 2.0 to Combo IDE 2.5' 3.5' Hard Drive Power Adapter Cable $22.49 Description:Access any 2.5"/3.5" IDE drive through Hi-Speed USB 2.0 portThe IDE USB Adapter turns any IDE drive into a convenient external drive.Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.The high speed USB interface provides for easy installation with its Plug and Play design.The USB 2.0 to IDE Adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives. Transfer rate up to 480 Mbps. Approx.Complies with USB 2.0 standards.Backwards compatible to USB 1.1 standards.The IDE USB Power Adapter complies with ATA/ATAPI-66 Spe. V1.0.Supports IDE and enhanced IDE hard drives.Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more.External power adapter for IDE/ATAPI devices.AC power adapter: input voltage: 100-240VCA, 50/60Hz, 0.5A.USB to IDE Adapter supports Windows ME / 2000 / XP, also support Mac OS 9.2/X and Linux.Size: 6.2cm long, 4cm wide ( at the widest ), 1cm thick. The USB cable: 74.4cm long. Approx.Color: As picture shows.Weight: 316g.Package contents:1 x USB 2.0 to SATA IDE Adapter with USB cable1 x AC power adapter ( 100-240VCA, 50/60Hz, 0.5A )1 x Power cable ( Three pins, AU plug )

CF To IDE 2.5 ide Adapter ide case for laptop $4.82 CF To IDE 2.5 inch ide Adapter ide case for laptop computer adapter ,hdd adapter industrial

SATA to IDE Converter - Storage controller - IDE - SATA $24.99 Black Box SATA to IDE Converter - Storage controller - IDE - SATA

StarTech.com 3.5 eSATA USB to IDE or SATA Hard Drive Enclosure $34.99 1 1 Year 1 x 3.5" - 1/3H Internal 1 x 40-pin IDC IDE/ATA Internal 1 x 7-pin eSATA External 1 x Mini-B USB 2.0 USB External 1.18 lb 2 x 7-pin Serial ATA/300 Internal 3.5 eSATA USB to IDE or SATA Hard Drive Enclosure 3.5" 5.31" Height x 2.06" Width x 8.27" Depth Convert either an IDE (PATA) or SATA hard drive into an external storage solution with USB 2.0 or eSATA connectivity. A screwless design allows for quick and easy installation or removal of hard drives from the enclosure without the use of any tools. Backed by a StarTech.com 1 year warranty and free lifetime technical support. FCC CE InfoSafe Storage Enclosure 1 x USB Mini B Cable 1 x eSATA Cable 1 x IDE Cable 1 x Driver CD 1 x Enclosure Stand 1 x Power Adapter 1 x SP4 to LP4 Adapter Cable 1 x SATA 7+15 Pin Cable OS Support Windows 2000, XP 32/64-bit and Win Vista 32/64-bit Mac OS 9.x / 10x & Above Linux Kernel 2.4.1.0 & Above StarTech.com's InfoSafe UNI3510U2E eSATA/USB to SATA/IDE External Hard Drive Enclosure delivers a versatile and cost-effective external storage solution, letting you turn any 3.5" Serial ATA (SATA, SATA II, SATA III) or IDE hard drive into an eSATA (SATA only) or USB 2.0 (SATA or IDE) connected external storage solution for high capacity drives. The External hard drive enclosure features a large built-in 80mm fan that provides enhanced re-distribution of heat build-up generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives, and faster "spinning" drives (i.e. 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity and the drive's lifespan by reducing the chances of premature failures. Its unique snap-in, screwless hard drive installation and "One Touch Backup", which automates backup tasks for simple backups of files and folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included), are design features which provide a convenient and efficient operating experience. The hard drive enclosure features an attractive silver aluminum casing that looks great in any operating environment, and is backed by our 1-year warranty and free lifetime technical support. EIDE External External Enclosure Not Applicable RoHS Serial ATA Silver StarTech.com Storage Enclosure UNI3510U2E Yes www.startech.com

SABRENT USB-DSC5 Serial ATA (SATA) or IDE 2.5 and 3.5 to USB 2.0 Cable Converter Adapter $21.99 Type: USB to IDE&SATA Specifications: USB 2.0 to Serial ATA (SATA) or IDE Cable Connect any device with an SATA and IDE Interface to a PC with USB interface Transfer rate supports 1.5Gb/s data rate Complies with USB 2.0 standards Backwards compatible to USB 1.1 standards Complies with SERIAL ATA (ATA) and IDE Supports SATA and enhanced SATA hard drives Supports SATA CD-ROM/R/RW DVD-ROM etc. External power adapter for SATA devices Features: Access any 2.5"/3.5"'/5.25" SATA or IDE drive through Hi-Speed USB 2.0 port Compatible with any SATA or IDE drives of any brand or any size 2A AC power supply to ensure enough power for the most power-consuming drives Plug and Play. Hot swapping Windows 98SE/ME/2000/XP/Mac OS X (Driver ONLY necessary for Windows 98SE). Package Contents: Serial ATA (SATA) or IDE 2.5" and 3.5" to USB ...

IDE Bold $29 Download the IDE Bold font for Mac or Windows in OpenType, TrueType or PostScript format.

IDE Oblique $29 Download the IDE Oblique font for Mac or Windows in OpenType, TrueType or PostScript format.

IDE Regular $29 Download the IDE Regular font for Mac or Windows in OpenType, TrueType or PostScript format.

Ide Volume $39 Download the Ide Volume font for Mac or Windows in OpenType, TrueType or PostScript format.

IDE to SATA Converter Adapter for 3.5 IDE HDD DVD $5.37 IDE to SATA Converter Adapter for 3.5 IDE HDD DVD IDE to SATA Converter sata to ide converter

Ide's Improved Beehive $19.99 Ide's Improved Beehive - Premium Poster

Uni3510U2Eb - Startech.Com 3.5In Black Esata Usb 2.0 To Ide Sata External Hard Drive Enclosure - 1 X 3.5 - 1/3H Internal - Ide $47.9 startech.com's Infosafe Uni3510u2eb Esata/usb to Sata/ide External Hard Drive Enclosure Delivers a Versatile And Cost-effective External Storage Solution, Letting You Turn Any 3.5 inch Serial Ata (sata, Sata Ii, Sata Iii) or Ide Hard Drive Into an Esata (sata Only) or Usb 2.0 (sata or Ide) Connected External Storage Solution For High Capacity Drives. The External Hard Drive Enclosure Features a Large Built-in 80mm Fan That Provides Enhanced Re-distribution of Heat Build-up Generated as a Result of Typical Drive Operation. This Feature is Especially Important For Larger Capacity Hard Drives, And Faster inch spinning inch Drives (i.e. 7200 Rpm), as it Can Help Keep Drives Running Cooler, Which Can Preserve Data Integrity And The Drive's Lifespan by Reducing The Chances of Premature Failures. its Unique Snap-in, Screwless Hard Drive Installation And inch one Touch Backup inch , Which Automates Backup Tasks For Simple Backups of Files And Folders at The Touch of a Button, Based on Pre-defined Settings Within The Easy to Use Software Utility (included), Are Design Features Which Provide a Convenient And Efficient Operating Experience. the Hard Drive Enclosure Features an Attractive Black Aluminum Casing That Looks Great in Any Operating Environment, And is Backed by Our 1-year Warranty And Free Lifetime Technical Support. [54772P] UPC: 065030833219 UNSPC: 43201608 7.4L x 10.6W x 3.8H 2.4 LB 0.17 Cubes

44pin to 40pin 3.5 to 2.5 laptop ide Male ide Converter $3.53 44pin to 40pin 3.5 to 2.5 laptop ide Male ide Converter

100pcs/lot 2 in 1 IDE to SATA / SATA to IDE Adapter Converter $244.21 100pcs/lot 2 in 1 IDE to SATA / SATA to IDE Adapter Converter

Serial ATA to IDE Converter (Serial ATA Port to IDE Device) $9.99 Serial ATA to IDE Converter (Serial ATA Port to IDE Device)

Generic Bi-Directional IDE to SATA or SATA to IDE Adapter Sybiridesa $19.39 Generic Bi-Directional IDE to SATA or SATA to IDE Adapter Sybiridesa

Transcend 256MB IDE Flash Module - 256 MB - IDE - Internal TS256MDOM40VS $23.29 Transcend 256MB IDE Flash Module - 256 MB - IDE - Internal TS256MDOM40VS

Imicro IDE-SATA & SATA-IDE 2-Way Adapter Stidesata $22.74 Imicro IDE-SATA & SATA-IDE 2-Way Adapter Stidesata

IDE to SATA or SATA to IDE Adapter $10.59 SpecificationType: Converter/Adapter Port: SATA/IDE Length (cm): 5.5 Weight (kg): 0.06

Addonics / IDE TO SATA CONVERTER / ADIDESA $36.75 Addonics - IDE TO SATA CONVERTER - ADIDESA

Addonics / DIAMOND ENCLOSURE FOR IDE / DICSB $59.12 Addonics - DIAMOND ENCLOSURE FOR IDE - DICSB

8x Dell DVDRW IDE JW884 $27.38 8x Dell DVDRW IDE JW884