Sata Seagate
 |
US $159.99
HddSurgery Seagate 7200.10 head change process
HDD Surgery Tools for data recovery experts
Seagate 7200.10 head change tool
HddSurgery Seagate 7200.10 head change tools
Seagate hard drives belong in the category of disks that "park heads" above the magnetic platters. That way of functioning implies that, in a situation when the drive is powered off, heads are located on the surface that has no sensitive magnetic material. This allows drive to start the motor to the required speed. The purpose of Seagate 7200.10 head change tool is to enable safe heads passage over the "data" area above platters surface, and to provide non-contact transfer to patient disc. HddSurgery Seagate 7200.10 head change tool is tool made for safe and easy head change on Seagate 7200.10, 7200.ES and 7200.8 drives with up to 3 platters. During the whole procedure of head change heads and platters do not have contact. Head are lifted over NON-data area and safely guided over the platters. In process of installing back the donor head same procedures needs to be done. Head are guided over platters with no contact and safely deployed in non-data area.
Supported models for HddSurgery Seagate 7200.10 head change tool
Seagate 7200.10 (3 platters) head change tool
PATA drives
ST3500630A, ST3500830A, ST3400620A, ST3400820A, ST3320620A, ST3320820A, ST3300620A ,ST3300820A, ST3250820A, ST3200820A, ST3400832A, ST3400632A, ST3300831A, ST3300631A, ST3250823A, ST3250623A, ST3200826A
SATA drives
ST3500630AS, ST3500830AS, ST3400620AS, ST3400820AS, ST3320620AS, ST3320820AS, ST3300620AS, ST3300820AS, ST3250620AS, ST3250820AS, ST3200820AS, ST3400832AS, ST3400632AS, ST3300831AS, ST3300631AS, ST3250823AS, ST3250623AS,ST3200826AS
ES.2 SATA drives
ST3500630NS, ST3320620NS, ST3250620NS
Head replacement process (9 steps)
Step 1. Mounting the tool on actuator arms
Remove screws holding flat cable contact and with a finger push contact from the bottom upwards to release it. The pressure from below may cause flat cable contacts to pop out and possibly damage platters, so hold firmly top of a flat cable contact with another hand while pushing related plastic. Before applying pressure remove screws from their holes. Carefully center the tool over the center hole of the hard disc head. Take care that the notch on the bottom of the tool coincides with the commas in the actuator arm base. Tighten the screw to perform tool installation.
With your right hand make sure that the tool shank with snouts remains in the area outside of the platters.
!!! IMPORTANT !!!
Be sure to tighten the screw in order to ensure good contact and proper tool height.
Step 2. Lifting the heads
By horizontally moving tool shank we slide the tool over platters. Construction of tools enables heads to lift on tool snouts by relatively small force. If you feel that the necessary force is greater than the expected, check tool positions and possible damage to the HDA assembly. Push the tool as far as limiter is allowing.
Step 3. Securing the tool
The tool has a hole at its edge, which coincides with the hole in the head. The leftmost position is necessary to ensure the bound between tool and actuator arm. Securing is being done with the securing pin.
!!!IMPORTANT!!!
If the connection of tool and actuator arms is not properly engaged, heads slipping is possible during disassembling.
Step 4. Moving the tool outside of platters area
By vertical scrolling move the tool (previously secured by pin) to the initial position.
Step 5. Dismounting the heads
With the help of a standard flat screwdriver unscrew the tool together with the heads. Hold the tool with one hand because of the possibly contact with the platters. Turn screw driver counter clockwise until heads are free.
Step 6. Mounting the head in a new drive
Use the same screwdriver to screw the heads on new hard drive. When screwing the heads tighten the screw too, just in case it got loosen up during the manipulation. This operation is necessary because of possible changes in height! Turn the screw driver clockwise.
By horizontal force return the head back towards the central section of the platters.
Step 7. Removing the pin
Carefully remove the securing pin when heads are above the parking zone.
Step 8. Removing the tool outside of platters
Horizontally push tool shank with a finger to return the tool outside of platters.
!!! IMPORTANT !!!
With another hand hold back side of head arm (magnetic coil) to prevent heads from moving.
Step 9. Dismounting the tool
Take out the screw and remove the tool. While loosening use the assisting tool to make counter force.
Put the lid back and close the disc. Put pcb back and clone the drive.
About the Author
Ivan Aracki, product manager
HddSurgery
www.hddsurgery.com
support@hddsurgery.com
|
|
Seagate / BLACKARMOR NAS 220 4TB SATA / ST340005LSA10G-RK $410.44 Seagate - BLACKARMOR NAS 220 4TB SATA - ST340005LSA10G-RK |
|
|
Seagate / 500GB INTERNAL KIT 7200.5 SATA / ST905003N3A1AS-RK $121.43 Seagate - 500GB INTERNAL KIT 7200.5 SATA - ST905003N3A1AS-RK |
|
|
Seagate / 500GB MOMENTUS 5400.6 SATA 5400 / ST9500325AS $94.33 Seagate - 500GB MOMENTUS 5400.6 SATA 5400 - ST9500325AS |
|
|
Seagate / 1TB BARRACUDA SATA 7200 RPM / ST310005N1A1AS-RK $121.43 Seagate - 1TB BARRACUDA SATA 7200 RPM - ST310005N1A1AS-RK |
|
|
Seagate / 500GB 7200RPM SATA Surveillanc / ST3500411SV $97.48 Seagate - 500GB 7200RPM SATA Surveillanc - ST3500411SV |
|
|
Seagate / 3TB BARRACUDA SATA 7200 RPM / STBD3000100 $218.29 Seagate - 3TB BARRACUDA SATA 7200 RPM - STBD3000100 |
|
|
Seagate / 2TB PipelineHD 3Gb/s SATA / ST2000VM002 $144.79 Seagate - 2TB PipelineHD 3Gb/s SATA - ST2000VM002 |
|
|
Seagate / 500GB Barracuda SATA HD / ST500DM002 $91.28 Seagate - 500GB Barracuda SATA HD - ST500DM002 |
|
|
Seagate / 2TB SV35.5 Series SATA 7200RPM / ST2000VX000 $149.64 Seagate - 2TB SV35.5 Series SATA 7200RPM - ST2000VX000 |
|
|
Seagate / 2TB Barracuda LP SATA HD / ST2000DL003 $138.1 Seagate - 2TB Barracuda LP SATA HD - ST2000DL003 |
|
|
Seagate / 1TB SV35.5 Series SATA 7200RPM / ST1000VX000 $119.61 Seagate - 1TB SV35.5 Series SATA 7200RPM - ST1000VX000 |
|
|
160GB SATA Seagate 5400RPM 8MB 2.5in ST9160827AS $45.6 160GB SATA Seagate 5400RPM 8MB 2.5in ST9160827AS |
|
|
120GB SATA Seagate Barracuda 7200RPM ST3120213AS $29.99 120GB SATA Seagate Barracuda 7200RPM ST3120213AS |
|
|
250GB SATA Seagate 7200RPM 3.5" 399969001 $83.79 250GB SATA Seagate 7200RPM 3.5" 399969001 |
|
|
160GB SATA Seagate Barracuda 7200RPM 8MB ST31600023AS $135.85 160GB SATA Seagate Barracuda 7200RPM 8MB ST31600023AS |
|
|
160GB SATA Seagate 7200RPM 150MB Oem ST3160023AS $36.99 160GB SATA Seagate 7200RPM 150MB Oem ST3160023AS |
|
|
Seagate Sata250gb 250Gb Barracuda Internal Sata Drive $89.99 In Store Clearance SEAGATE SATA250GB 250GB BARRACUDA INTERNAL SATA DRIVE |
|
|
Seagate Technology / Seagate 1TB SATA 6Gb s Desktop Storage 7200 rpm 32MB Cache Bare Drive / ST31000524AS $118.26 Seagate Technology - Seagate 1TB SATA 6Gb s Desktop Storage 7200 rpm 32MB Cache Bare Drive - ST31000524AS |
|
|
Seagate Technology / Seagate HD ST250DM000 250GB 16MB 7200RPM SATA III Internal Bare / ST250DM000 $85.43 Seagate Technology - Seagate HD ST250DM000 250GB 16MB 7200RPM SATA III Internal Bare - ST250DM000 |
|
|
Seagate Technology / Seagate 1TB SATA 6Gb s Desktop Storage 7200 rpm 64MB Cache Bare Drive / ST1000DM003 $115.1 Seagate Technology - Seagate 1TB SATA 6Gb s Desktop Storage 7200 rpm 64MB Cache Bare Drive - ST1000DM003 |
|
|
Seagate Technology / Seagate ST3000DM001 Barracuda 64MB 3TB SATA III 6Gb s 7200rpm Bare / ST3000DM001 $200.87 Seagate Technology - Seagate ST3000DM001 Barracuda 64MB 3TB SATA III 6Gb s 7200rpm Bare - ST3000DM001 |
|
|
Seagate / 2.0TB Internal 3.5" SATA 62MB / STBD2000101 $184.26 Seagate - 2.0TB Internal 3.5" SATA 62MB - STBD2000101 |
|
|
Seagate / 750GB Internal 2.5" SATA 32MB / STBD750100 $229.23 Seagate - 750GB Internal 2.5" SATA 32MB - STBD750100 |
|
|
Seagate SATA - 5900 rpm - 64 MB Buffer - 3.5" ST2000VM002 $139.26 Seagate SATA - 5900 rpm - 64 MB Buffer - 3.5" ST2000VM002 |
|
|
40GB SATA Seagate LD25 Series 5400RPM 2MB 9.5mm Oem ST9402115AS $18.91 40GB SATA Seagate LD25 Series 5400RPM 2MB 9.5mm Oem ST9402115AS |
|
|
160GB SATA II/300 Seagate Momentus 5400RPM 8MB 2.5in ST9160310AS $46.37 160GB SATA II/300 Seagate Momentus 5400RPM 8MB 2.5in ST9160310AS |
|
|
160GB SATA Seagate Momentus FDE.2 5400RPM 8MB ST9160824AS $46.37 160GB SATA Seagate Momentus FDE.2 5400RPM 8MB ST9160824AS |
|
|
40GB SATA Seagate LD25.2 Series 5400RPM 2MB 9.5mm Oem ST940210AS $17.93 40GB SATA Seagate LD25.2 Series 5400RPM 2MB 9.5mm Oem ST940210AS |
|
|
250GB SATA Seagate Barracuda 7200RPM 8MB Oem ST3250310AS $45.99 250GB SATA Seagate Barracuda 7200RPM 8MB Oem ST3250310AS |
|
|
40GB SATA Seagate Barracuda 7200RPM 8MB OEM ST340014AS $25.28 40GB SATA Seagate Barracuda 7200RPM 8MB OEM ST340014AS |
|
|
500GB SATA Seagate Barracuda ES SATA/300 7200RPM 16MB ST3500631NS $69.99 500GB SATA Seagate Barracuda ES SATA/300 7200RPM 16MB ST3500631NS |
|
|
250GB SATA Seagate Barracuda 7200.10 7200RPM 16MB Oem ST3250410AS $55.22 250GB SATA Seagate Barracuda 7200.10 7200RPM 16MB Oem ST3250410AS |
|
|
250GB SATA Seagate Barracuda / HP 7200RPM 8MB Oem ST3250310AS $59.99 250GB SATA Seagate Barracuda / HP 7200RPM 8MB Oem ST3250310AS |
|
|
160GB SATA II Seagate Barracuda 7200.9 7200RPM 8MB 3.5in ST3160812AS $46.94 160GB SATA II Seagate Barracuda 7200.9 7200RPM 8MB 3.5in ST3160812AS |
|
|
320GB SATA Seagate Barracuda 7200RPM Ultra 8MB ST3320833AS $73.99 320GB SATA Seagate Barracuda 7200RPM Ultra 8MB ST3320833AS |
|
|
320GB SATA Seagate Barracuda ES 7200RPM 3.5 ST3320630NS $46.51 320GB SATA Seagate Barracuda ES 7200RPM 3.5 ST3320630NS |
|
|
250GB SATA Seagate / IBM NL35 Series 7200RPM 8MB Oem ST3250823NS $46.99 250GB SATA Seagate / IBM NL35 Series 7200RPM 8MB Oem ST3250823NS |
|
|
160GB SATA II Seagate Barracuda 7200.10 7200RPM 8MB Oem ST3160815AS $52.99 160GB SATA II Seagate Barracuda 7200.10 7200RPM 8MB Oem ST3160815AS |
|
|
80GB SATA Seagate Barracuda 7200RPM NCQ Oem ST380815AS $33.57 80GB SATA Seagate Barracuda 7200RPM NCQ Oem ST380815AS |
